| |
Description : F3 Unlock Clip ¨C is the
easiest unlock solution, available on the market yet.
It is operated by one button and requires to be powered
from mains adapter or even 9V battery.
The only model supported - MOTOFONE F3
F3 unlock procedure description
1. Connect power to F3 Unlock Clip (9V battery can be
used).
2. Connect F3UC to the handset, powered on or switched
into boot mode*.
3. Press Unlock button on the clip.
4. LED on the clip starts to blink frequently. Unlock
process is in progress.
5. On successful unlock, LED stops blinking and lights
up for about 10 seconds.
*To switch F3 into boot mode, please power off the phone
and press 3 keys combination: *#Power On. The handset
display will remain blank.
NOTE
If the LED on F3 Unlock Clip, after frequent blinking
starts to blink slower instead of lighting up ¨C the unlock
process failed. Please disconnect the phone from the cable,
remove and insert the battery, switch the phone to boot
mode and perform unlock again.
|
|
